Kenmore Washer Model 110.25842400 Manual

The Kenmore Washer Model 110.25842400 is a top-loading automatic washing machine with a large capacity tub, multiple wash cycles, and electronic controls. It features a durable steel cabinet, automatic temperature control, a lint filter, and an automatic bleach dispenser. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Operating the Washer 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Agitator, Large capacity tub, Lint filter, Automatic bleach dispenser, Water inlet valves, Drain pump.

Feature	Description
Electronic Control Panel	For selecting cycles, options, and starting the washer
Agitator	Provides thorough cleaning action
Large Capacity Tub	Handles big laundry loads efficiently
Lint Filter	Traps lint during wash and rinse cycles
Automatic Bleach Dispenser	Safely adds bleach at the right time
Water Inlet Valves	Controls hot and cold water supply
Drain Pump	Removes water from the tub
Cycle Status Lights	Indicates current stage of wash cycle
Automatic Temperature Control	Mixes hot and cold water to selected temperature
Delay Start	Allows setting a later start time

Installation

Unpack and inspect contents. Place on a level, solid floor.

Remove shipping materials: Take out all bolts and braces from the rear and interior.
Connect water supply: Attach hot and cold water hoses to corresponding faucets and inlet valves.
Connect drain hose: Secure drain hose to standpipe or laundry tub.
Level the washer: Adjust leveling legs to prevent vibration.
Plug into a grounded 120V AC outlet.

WARNING! Washer is heavy; use caution when moving. Ensure all connections are tight to prevent leaks.

First-Time Setup

Before first use, run a complete cycle without clothes to clean the tub.

Add detergent: Pour 1/2 cup of liquid detergent into the detergent dispenser.
Select cycle: Turn the cycle selector to "NORMAL" and press START.
Check for leaks: Monitor water connections during fill.
Familiarize with controls: Review cycle options and settings.

CAUTION! Do not use the washer until it is properly leveled and all shipping materials are removed.

Specifications

Model: 110.25842400
Type: Top-Loading Automatic Washer
Capacity: Large Capacity (exact cubic feet as per model)
Control Type: Electronic
Water Connections: Hot & Cold water inlet hoses
Electrical: 120V, 60Hz, 15 Amp grounded outlet
Cycle Options: Normal, Heavy Duty, Delicates, Quick Wash, Rinse & Spin
Special Features: Soak option, Extra Rinse, Delay Start, Automatic Temperature Control
Exterior Dimensions: Standard washer dimensions

Controls and Settings

Access functions via the electronic control panel.

Control Panel: Cycle Selector Knob, START/PAUSE button, OPTIONS buttons (Soak, Extra Rinse, etc.), Temperature Selector, Load Size Selector, Delay Start button.

Cycles: NORMAL (for cottons, linens), HEAVY DUTY (for heavily soiled items), DELICATES (for gentle fabrics), QUICK WASH (for small, lightly soiled loads), RINSE & SPIN (for rinsing or draining). Options: SOAK (for pre-treating stains), EXTRA RINSE (adds an additional rinse), DELAY START (sets start time up to 24 hours). Settings: Water Temperature (Hot, Warm, Cold), Load Size (Small, Medium, Large, Extra Large).

Connecting Water & Drain

Water Supply: Hot and cold water faucets. Drain: Standpipe or laundry tub.

Turn off water faucets before connecting hoses.
Connect hot and cold hoses to correct inlet valves (marked H and C).
Secure drain hose to standpipe (minimum height 39 inches) or use a hose guide for a laundry tub.
Turn on water faucets and check for leaks.

Tip: Use new hoses; do not overtighten. Ensure drain hose is not kinked.

Operating the Washer

Follow these steps for normal operation.

Load clothes: Do not overload; distribute evenly around agitator.
Add detergent: Pour into detergent dispenser. For bleach, use automatic dispenser only.
Select cycle: Turn knob to desired cycle (e.g., NORMAL).
Select options: Press buttons for SOAK, EXTRA RINSE, etc.
Select temperature and load size.
Press START/PAUSE to begin cycle.
To pause: Press START/PAUSE; press again to resume.
At end of cycle: Remove clothes promptly to prevent wrinkles.

WARNING! Do not use chlorine bleach in the automatic dispenser with the SOAK option. Keep lid closed during operation.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint filter after every cycle.
Wipe control panel and exterior with a damp cloth.
Monthly: Run a cleaning cycle with a washer cleaner or hot water and bleach (no clothes).
Inspect hoses annually for cracks or bulges; replace every 5 years.
Keep area around washer clean and dry.

CAUTION! Unplug washer before cleaning. Do not use abrasive cleaners.

Regulatory Information

This appliance complies with applicable safety standards. Copyright and trademarks are property of their respective owners. For support, visit www.kenmore.com or contact 1-800-426-9225.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/Lid	Ensure plugged in; outlet has power; close lid securely.
No water filling	Water supply/hoses	Check water faucets are on; inspect hoses for kinks; clean inlet screens.
Water doesn't drain	Drain hose/clog	Check for kinks; ensure proper drain height; clean pump filter if accessible.
Excessive vibration/noise	Leveling/load	Ensure washer is level; redistribute load evenly; remove shipping materials.
Leaking water	Loose connections/hoses	Tighten hose connections; check for damaged hoses or tub seal.
Clothes still soapy	Detergent/drain	Use less detergent; ensure proper draining; use HE detergent if required.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-426-9225; www.kenmore.com