Kenmore Washer Model 110.28132410 Manual

The Kenmore Washer Model 110.28132410 is a top-loading washing machine with a large capacity, multiple wash cycles, and energy-efficient operation. It features a durable stainless steel wash basket, electronic controls, automatic temperature control, and a variety of settings for different fabric types. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Stainless steel wash basket, Agitator, Lid lock, Water inlet valves, Drain pump, Leveling legs.

FeatureDescription
Electronic control panelFor selecting wash cycles, options, and settings
Stainless steel wash basketDurable and rust-resistant interior
AgitatorProvides thorough cleaning action
Lid lockSafety feature that prevents opening during cycle
Water inlet valvesControls hot and cold water supply
Drain pumpRemoves water from the washer
Leveling legsAdjustable for stable installation
Multiple wash cyclesIncludes Normal, Heavy Duty, Delicates, Quick Wash
Temperature controlAutomatic mixing of hot and cold water
Load size selectionSmall, Medium, Large, and Extra Large options

Installation

Unpack and inspect contents. Place on level floor near water supply and drain.

  1. Remove shipping materials: Take out transit bolts and packing materials.
  2. Connect water supply: Attach hot and cold hoses to corresponding faucets.
  3. Connect drain hose: Secure to standpipe or laundry tub.
  4. Level the washer: Adjust front leveling legs until machine is stable.
  5. Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Before first use, run a cleaning cycle.

  1. Add cleaner: Pour washing machine cleaner into empty basket.
  2. Select cycle: Choose Clean Washer cycle or Normal cycle with hot water.
  3. Start cycle: Close lid and press START.
  4. Set preferences: Use control panel to select default settings if desired.

CAUTION! Do not use bleach for initial cleaning cycle. Ensure washer is level to prevent vibration.

Specifications

Controls and Settings

Access settings via control panel. Lid: Open/close with handle. Control Panel: POWER, CYCLE SELECTOR, OPTIONS, START/PAUSE.

Cycle Selector: Normal, Heavy Duty, Delicates, Quick Wash, Rinse & Spin, Drain & Spin, Clean Washer.

Options: Temperature (Hot, Warm, Cold), Spin Speed (High, Medium, Low, No Spin), Soil Level (Heavy, Normal, Light), Extra Rinse, Pre-Soak. Settings: Default settings can be adjusted by holding buttons for 3 seconds.

Connecting Water Supply

Hot and Cold: Connect hoses to corresponding faucets. Drain: Secure hose to standpipe.

  1. Turn off water supply before connecting hoses.
  2. Use only new hoses; do not reuse old hoses.
  3. Ensure drain hose is not kinked and is at proper height.
  4. Check for leaks after connections are made.

Tip: Use thread seal tape on hose connections for better seal.

Using Wash Cycles

Supports various fabrics and soil levels.

  1. Load clothes: Do not overload; leave space for agitation.
  2. Add detergent: Use HE detergent; follow manufacturer's instructions.
  3. Select cycle: Turn cycle selector to desired wash cycle.
  4. Select options: Choose temperature, spin speed, soil level.
  5. Start: Close lid and press START.
  6. Pause: Press START/PAUSE to pause; open lid after agitation stops.
  7. Complete: Washer will signal end of cycle; remove clothes promptly.

WARNING! Do not open lid during spin cycle. Keep children away from operating washer.

Special Features

Clean Washer Cycle: Removes residue and odors; run monthly. Extra Rinse: Adds additional rinse for sensitive skin. Pre-Soak: Soaks clothes before washing for heavy stains. Delay Start: Set start time up to 24 hours in advance.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean interior with washer cleaner monthly.

CAUTION! Do not use abrasive cleaners; keep control panel dry. Clean lint filter regularly.

Regulatory Information

UL Listed: Complies with safety standards. Energy Star: Meets energy efficiency guidelines. Copyright © 2025 Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

SymptomPossible CauseCorrective Action
Washer won't startPower/lidEnsure plugged in; close lid securely; check circuit breaker.
No water fillingSupply valves/hosesTurn on water supply; check for kinked hoses; clean inlet screens.
Excessive vibrationLeveling/loadLevel washer; redistribute load; remove shipping materials.
Water not drainingDrain hose/pumpCheck for kinks; clean pump filter; ensure proper drain height.
Clothes too wetSpin speed/loadSelect higher spin speed; do not overload; check drain pump.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-469-4668; www.kenmore.com

Kenmore Washer Model 110.28132410 Manual © - All Rights Reserved 2025