Kenmore Washer User Manual

The Kenmore Washer is a high-efficiency top-loading washing machine featuring multiple wash cycles, adjustable settings, energy-saving modes, and durable construction. Designed for residential use, it offers reliable performance with options for various fabric types and soil levels. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Agitator, Lid, Water Inlet Valves, Drain Pump, Leveling Legs.

Installation

Unpack and inspect contents. Place on level floor near water supply and drain.

1. Connect water supply: Attach hot and cold hoses to corresponding valves.
2. Connect drain hose: Secure to standpipe or laundry sink.
3. Level the washer: Adjust front legs for stability.
4. Plug into grounded electrical outlet.

WARNING! Washer is heavy; lift with care to avoid injury. Ensure all connections are secure and leak-free.

First-Time Setup

Power on washer; follow initial setup prompts.

1. Run test cycle: Select Quick Wash without laundry to flush system.
2. Set preferences: Use control panel to set default temperature, spin speed.
3. Check for leaks: Inspect hoses and connections after first cycle.
4. Read manual: Familiarize yourself with safety instructions.

CAUTION! Ensure washer is level; improper leveling can cause vibration and noise.

Specifications

• Capacity: 4.5 cubic feet.
• Dimensions: 27" W x 27" D x 42" H.
• Voltage: 120V AC, 60Hz.
• Water Connections: Hot and cold inlet.
• Wash Cycles: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items.
• Options: Pre-wash, Extra Rinse, Delay Start.
• Energy Rating: ENERGY STAR certified.
• Operating Temp: Standard indoor temperature.

Controls and Settings

Access settings via control panel. Front Panel: POWER, START/PAUSE, CYCLE SELECTION, OPTIONS.

Display: Shows cycle time, settings, and error codes.

Cycle Selection: NORMAL, HEAVY DUTY, DELICATES, QUICK WASH, BULKY. Options: Temperature (Hot, Warm, Cold), Spin Speed (High, Medium, Low), Soil Level (Heavy, Normal, Light). Special Features: Delay Start (1-24 hours), Pre-wash, Extra Rinse.

Connecting Water Supply

Hot/Cold Inlets: Rear connections. Drain: Hose to standpipe.

1. Turn off water supply before connecting hoses.
2. Use provided hoses; hand-tighten only.
3. Ensure drain hose is secured to prevent slipping.
4. Check for leaks after connections.

Tip: Use thread seal tape on hose connections for better seal.

Using Wash Cycles

Supports various fabrics and soil levels.

1. Load laundry: Do not overload; follow capacity guidelines.
2. Add detergent: Use HE detergent; follow manufacturer instructions.
3. Select cycle: Choose based on fabric type and soil level.
4. Adjust options: Set temperature, spin speed, and additional features.
5. Start: Press START/PAUSE; lid will lock during operation.
6. Pause: Press START/PAUSE to add or remove items.
7. Complete: Washer will signal end of cycle; unlock lid.

WARNING! Do not force lid open during operation. Keep hands clear of agitator.

Special Features

Delay Start: Set wash to begin later. Pre-wash: For heavily soiled items. Extra Rinse: For sensitive skin or detergent residue. Child Lock: Prevents accidental changes to settings.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean interior with washer cleaner monthly.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

UL Listed; complies with safety standards. ENERGY STAR certified for energy efficiency. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Reset: Unplug for 1 minute, then restart.

Service: 1-800-469-4668; www.kenmore.com