Kenmore Washing Machine Front Loader Manual

The Kenmore Front Load Washing Machine is a high-efficiency appliance designed for residential use. It features multiple wash cycles, temperature settings, spin speed controls, and advanced options like steam cleaning and sanitize cycles. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading door with glass window, Control Panel, Detergent Dispenser, Drain Pump Filter, Leveling Feet, Water Inlet Hoses, Power Cord.

Feature	Description
Control Panel	Digital display with touch or dial controls for cycle selection
Wash Cycles	Normal, Heavy Duty, Delicates, Quick Wash, Sanitize, Steam Clean
Temperature Settings	Hot, Warm, Cold, Tap Cold options
Spin Speed	Adjustable speeds for different fabric types
Detergent Dispenser	Compartments for detergent, bleach, and fabric softener
Door Lock	Automatic lock during operation for safety
Delay Start	Set wash cycle to begin at a later time
Child Lock	Prevents accidental changes to settings
End of Cycle Signal	Audible alert when wash is complete
Energy Star Certified	High efficiency for water and energy savings

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove shipping materials: Take off transit bolts from rear panel.
Level the machine: Adjust front leveling feet until machine is stable.
Connect water supply: Attach hot and cold water inlet hoses to corresponding faucets.
Connect drain hose: Secure to standpipe or laundry sink.
Plug into grounded electrical outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on washer; run initial cleaning cycle.

Set language: Use control panel to select ENGLISH (default).
Run cleaning cycle: Select "Clean Washer" or "Tub Clean" cycle without laundry.
Calibrate: Allow machine to complete initial calibration.
Load detergent: Fill dispenser compartments as needed.

CAUTION! Ensure machine is level to prevent excessive vibration during spin cycles.

Specifications

Capacity: 4.5 cu. ft. (typical model).
Dimensions: 27" W x 39" H x 32" D (approximate).
Voltage: 120V AC, 60Hz.
Water Connections: Hot and Cold water inlet (3/4" standard hoses).
Max Spin Speed: 1300 RPM.
Noise Level: Less than 60 dB during operation.
Energy Rating: ENERGY STAR® Most Efficient.
Warranty: 1-year limited parts and labor.

Controls and Settings

Access settings via control panel dial and buttons.

Control Panel: POWER, Cycle Selector Dial, Temperature Buttons, Spin Speed, Options (Delay Start, Extra Rinse, Pre-Wash), Start/Pause.

Cycle Settings: NORMAL (for cottons), HEAVY DUTY (for heavily soiled items), DELICATES (gentle wash), QUICK WASH (30-minute cycle), SANITIZE (uses high temperature), STEAM CLEAN (for refresh and stain removal). Options: Delay Start (1-24 hours), Extra Rinse, Pre-Wash, Child Lock (hold buttons for 3 seconds).

Connecting Utilities

Water: Hot and cold inlet hoses. Drain: Hose to standpipe. Power: Grounded outlet.

Turn off water supply before connecting hoses.
Use only new hoses; do not reuse old ones.
Ensure drain hose is secured to prevent slipping.
Plug into dedicated 15-amp circuit.

Tip: Leave at least 4 inches between washer and wall for hose clearance.

Operating the Washer

Follow steps for proper loading and cycle selection.

Sort laundry: Separate by color, fabric type, and soil level.
Load machine: Do not overload; leave space for movement.
Add detergent: Use HE detergent only; follow manufacturer's instructions.
Select cycle: Turn dial to desired wash cycle.
Adjust settings: Set temperature, spin speed, and options.
Start: Press START/PAUSE; door will lock automatically.
Unload promptly: Remove clothes when cycle ends to prevent wrinkles.

WARNING! Do not open door during operation; wait for lock light to turn off.

Special Features

Steam Clean: Reduces wrinkles and odors; uses steam without full wash. Sanitize Cycle: Heats water to eliminate bacteria. Delay Start: Program wash to finish at desired time. Child Lock: Prevents changes to settings during cycle.

Care & Cleaning

Monthly maintenance recommended.

Clean detergent dispenser: Remove tray and rinse under warm water.
Clean door seal: Wipe with damp cloth to remove residue.
Run cleaning cycle: Use "Clean Washer" cycle monthly.
Check drain pump filter: Clean if draining is slow.

CAUTION! Unplug machine before cleaning. Do not use abrasive cleaners on surfaces.

Regulatory Information

UL Listed; complies with NSF/ANSI 7 for residential use. Copyright © Kenmore; trademarks of Sears Brands, LLC. Energy Guide label provides estimated yearly operating cost. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Door not closed/power	Ensure door is fully closed; check power outlet; press START firmly.
No water filling	Water supply/valves	Check that water valves are fully open; inspect hoses for kinks.
Excessive vibration	Uneven load/leveling	Redistribute load evenly; re-level the machine.
Water leaks	Loose connections	Tighten water hoses; check door seal for debris.
Drain error	Clogged filter/drain	Clean drain pump filter; ensure drain hose is not kinked.
Unusual noise	Foreign objects	Check for coins or small items in drum or pump.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-469-4668; www.kenmore.com