Kenmore Washing Machine Type 111 Manual

The Kenmore Washing Machine Type 111 is a top-loading washer known for its reliability, large capacity, and multiple wash cycles. It features an automatic agitator, adjustable water levels, various temperature settings, and a durable stainless steel tub. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Top-loading stainless steel tub, Automatic agitator, Control panel with dials/buttons, Water inlet hoses, Drain hose, Leveling legs.

Feature	Description
Capacity	Large capacity tub for family-sized loads
Wash Cycles	Normal, Heavy Duty, Delicate, Quick Wash, Rinse & Spin
Water Level Selection	Adjustable water levels (Low, Medium, High, Max)
Temperature Settings	Hot, Warm, Cold water options
Agitator	Automatic agitator for thorough cleaning
Lid Lock	Safety feature that pauses cycle when lid is open
Delay Start	Option to delay wash cycle start time
Signal	End-of-cycle signal (can be turned on/off)
Power	120V AC, 60Hz standard outlet

Installation

Unpack and inspect contents. Place on level floor near water supply and drain.

Remove shipping materials: Take off transit bolts and packing materials.
Level the washer: Adjust leveling legs to ensure machine is stable.
Connect water supply: Attach hot and cold water hoses to corresponding faucets.
Connect drain hose: Place drain hose into standpipe or laundry sink.
Plug into electrical outlet: Use grounded 120V outlet.

WARNING! Do not remove transit bolts before moving to final location. Ensure water connections are tight to prevent leaks.

First-Time Setup

Before first use, run an empty cycle to clean the tub.

Ensure water connections are secure and valves are open.
Select Normal cycle with hot water and add 1 cup of bleach to dispenser.
Run complete cycle without laundry.
After cycle completes, the washer is ready for use.

CAUTION! Do not use harsh chemicals for initial cleaning. Follow manufacturer's instructions.

Specifications

Model Type: Type 111 Top-Load Washer
Capacity: 4.0 cubic feet
Dimensions: 27" W × 27" D × 43" H
Water Connections: Hot & Cold water inlet
Electrical: 120V, 60Hz, 15A
Cycle Options: 5 wash cycles, 3 temperature settings
Agitator Type: Automatic dual-action
Construction: Porcelain enamel tub, stainless steel basket
Weight: 150 lbs (approx.)

Controls and Settings

Control Panel: Cycle selector knob, Temperature buttons, Water level button, Start/Pause button, Signal button, Delay Start button.

Cycle Selection: Turn knob to desired cycle (Normal, Heavy Duty, Delicate, Quick Wash, Rinse & Spin).

Temperature Settings: Press corresponding button (Hot, Warm, Cold) for wash and rinse temperatures.

Water Level: Press Water Level button to cycle through options (Low, Medium, High, Max).

Additional Features: Delay Start (1-12 hours), Signal On/Off, Lid Lock indicator.

Connecting Water Supply

Hot and cold water connections required for full functionality.

Turn off water supply at faucets.
Connect hoses: Red to hot water, blue to cold water.
Hand-tighten connections; do not overtighten.
Turn on water supply and check for leaks.
Ensure drain hose is properly secured in standpipe (not inserted more than 6 inches).

Tip: Use only new hoses; replace hoses every 5 years to prevent failure.

Operating the Washer

Follow these steps for proper operation.

Load laundry: Do not overload; leave space for agitation.
Add detergent: Use HE or regular detergent as recommended.
Select cycle: Turn knob to desired wash cycle.
Set options: Choose temperature, water level, and any additional features.
Start cycle: Press Start/Pause button.
Pause/stop: Press Start/Pause to pause; turn knob to Off to cancel.
Unload: Wait for cycle to complete and signal sounds (if enabled).

WARNING! Do not open lid during spin cycle. Wait for agitation to stop completely.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Monthly: Run empty hot water cycle with washer cleaner or vinegar.
Quarterly: Clean detergent dispenser and lint filter.
Annually: Check hoses for wear; inspect for leaks.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.

CAUTION! Unplug washer before any maintenance. Do not use harsh chemicals on control panel.

Regulatory Information

UL Listed; meets U.S. safety standards. Energy Star certified for energy efficiency. Manufactured for Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668. Serial number located on back panel near power cord.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power issue, lid open	Ensure plug is secure; close lid completely; check circuit breaker.
No water filling	Water supply off, kinked hoses	Turn on water valves; straighten hoses; check inlet screens.
Water doesn't drain	Clogged drain, drain hose issue	Check drain hose for kinks; clean lint filter; ensure proper drain height.
Excessive vibration	Unlevel floor, overloaded	Level washer; redistribute load; ensure transit bolts removed.
Leaking water	Loose connections, damaged hoses	Tighten hose connections; replace damaged hoses; check tub seal.
Poor cleaning	Wrong detergent, overload	Use recommended detergent; reduce load size; select proper cycle.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-469-4668; www.kenmore.com