Manual for Kenmore Vacuum

The Kenmore Vacuum is a versatile household cleaning appliance designed for efficient carpet and floor cleaning. It features powerful suction, multiple attachments for various surfaces, adjustable height settings, HEPA filtration, bag or bagless options, cord management, and easy-to-empty dust containers. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motor unit with suction control, Handle with power switch, Dust container or bag system, Hose with wand, Floor brush with adjustable height, Crevice tool, Upholstery brush, HEPA filter.

Assembly Instructions

Unpack and inspect all parts. Assemble on a flat surface.

1. Attach handle: Align handle with main body and secure with provided screws.
2. Connect hose: Insert hose end into port on vacuum body until it clicks.
3. Attach wand: Insert wand into hose end and twist to lock.
4. Attach floor brush: Connect floor brush to wand end; ensure it clicks into place.
5. Install filter: Place HEPA filter into filter compartment as directed.
6. For bagged models: Insert bag into bag compartment following arrows.

WARNING! Ensure all parts are securely connected before use to prevent detachment during operation.

First-Time Setup

Before first use, complete these steps.

1. Check power cord: Unwind cord fully and inspect for damage.
2. Adjust height: Set floor brush height appropriate for your floor type.
3. Test attachments: Ensure all attachments connect and detach smoothly.
4. Empty dust container: If pre-filled, empty before use (bagless models).
5. Plug into outlet: Use a grounded 120V outlet.

CAUTION! Do not use vacuum if cord or plug is damaged. Keep away from water.

Specifications

• Motor Power: [Insert specific amps/watts] (e.g., 12 amps).
• Suction Power: Adjustable via control dial.
• Cord Length: Typically 25-30 feet.
• Dust Capacity: [Insert capacity] liters/quarts for bagless; standard bags for bagged models.
• Filtration: HEPA filter captures 99.97% of particles.
• Attachments Included: Crevice tool, upholstery brush, dusting brush.
• Weight: Approximately 15-20 lbs.
• Power Source: 120V AC, 60Hz.
• Warranty: Limited 1-year warranty.

Controls and Settings

Main controls located on handle or body.

Handle Controls: Power On/Off switch, Suction control dial, Hose release button.

Settings: Height adjustment lever (usually on floor brush) - set to LOW for bare floors, MEDIUM for low-pile carpets, HIGH for thick carpets. Bag full indicator light (if equipped) - illuminates red when bag needs changing. Filter check indicator - alerts when filter requires cleaning/replacement.

Using Attachments

Attachments enhance cleaning for specific areas.

1. Detach wand: Press wand release button and pull wand from floor brush.
2. Choose tool: Select crevice tool for tight spaces, upholstery brush for furniture, dusting brush for shelves.
3. Attach tool: Push tool onto wand end until it clicks.
4. Clean: Use tool on appropriate surface; adjust suction if needed.
5. Return to floor cleaning: Reattach wand to floor brush.

Tip: Store attachments on vacuum body if storage clips are provided.

Cleaning Operations

Follow these steps for effective cleaning.

1. Prepare area: Remove small objects that could clog vacuum.
2. Adjust settings: Set correct height and suction for surface.
3. Plug in: Insert plug into outlet.
4. Turn on: Press power switch; vacuum will start.
5. Clean methodically: Use slow, overlapping passes for carpets.
6. Empty container: When full, turn off and empty dust container (bagless) or replace bag.
7. Unplug: After use, turn off, unplug, and wrap cord.

WARNING! Do not vacuum liquids, ashes, or sharp objects. Avoid pulling cord to unplug.

Maintenance & Care

Regular maintenance ensures optimal performance.

• Empty dust container: Empty after each use or when full indicator lights.
• Clean filter: Remove and tap HEPA filter monthly; wash if washable (let dry 24 hrs).
• Check brush roll: Remove hair and debris from brush roll regularly.
• Inspect hose: Clear clogs with long object if suction reduces.
• Store properly: Keep in dry area; avoid crushing hose.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Safety Information

Read all safety instructions before use.

• Use only as intended for dry household debris.
• Keep away from children and pets during operation.
• Do not use with wet filters or containers.
• Avoid vacuuming hot ashes, coins, or large objects.
• Do not carry vacuum by cord or yank cord to disconnect.

WARNING! Risk of electric shock. Do not use outdoors or on wet surfaces.

Regulatory Information

FCC Part 15: Class B device; complies with interference limits. UL listed for safety. Copyright © [Year] Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Reset: Some models have reset button on motor housing; press if motor overheats.

Service: 1-800-469-4668; www.kenmore.com