Manual for Kenmore Washer

The Kenmore Washer is a high-efficiency laundry appliance designed for home use, featuring multiple wash cycles, temperature settings, load size options, and energy-saving modes. It includes safety features, child lock, delay start, and diagnostic functions. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, drum, water inlet valves, drain pump, and leveling feet.

Feature	Description
Wash Cycles	Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items
Temperature Settings	Hot, Warm, Cold, Tap Cold
Spin Speed Options	High, Medium, Low, No Spin
Load Size Selection	Small, Medium, Large, Extra Large
Delay Start	Program wash to begin later (1-24 hours)
Child Lock	Prevents accidental changes to settings
Energy Saver Mode	Reduces power and water consumption
Self-Clean Cycle	Cleans drum and dispenser automatically
Diagnostic Mode	Helps identify error codes and issues
End of Cycle Signal	Audible alert when wash completes

Installation

Unpack and inspect contents. Place on level floor near water and drain connections.

Remove shipping materials: Take off transit bolts and packaging.
Level the washer: Adjust front leveling feet until machine is stable.
Connect water supply: Attach hot and cold hoses to corresponding faucets.
Connect drain hose: Secure to standpipe or laundry sink.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are tight to prevent leaks.

First-Time Setup

Power on washer; run initial setup.

Select language: Use control knob to choose language (default ENGLISH).
Run test cycle: Run empty quick wash to check connections.
Set default preferences: Choose temperature, spin speed, and signal volume.
Activate child lock: Press and hold LOCK button for 3 seconds if needed.

CAUTION! Ensure washer is level to prevent vibration and noise during spin cycles.

Specifications

Capacity: 4.5 cubic feet.
Dimensions: 27" W x 38" H x 30" D.
Water Connections: Hot and cold inlet hoses (3/4").
Electrical: 120V AC, 60Hz, 15A dedicated circuit.
Cycle Times: 15 minutes to 2 hours depending on settings.
Noise Level: Less than 65 dB during operation.
Weight: 180 lbs (empty).
Warranty: 1-year limited parts and labor.

Controls and Settings

Access settings via control knob and buttons. Control Panel: POWER, START/PAUSE, CYCLE SELECTION, TEMPERATURE, SPIN SPEED, OPTIONS.

Display: Shows cycle time, settings, and error codes.

Cycle Selection: Normal, Heavy Duty, Delicates, Quick Wash, Bulky, Self Clean. Temperature: Hot (140°F), Warm (100°F), Cold (60°F), Tap Cold. Spin Speed: High (1200 RPM), Medium (800 RPM), Low (400 RPM), No Spin. Options: Delay Start, Extra Rinse, Pre-Wash, Soil Level, Child Lock.

Connecting Utilities

Water: Hot and cold hoses. Drain: Hose to standpipe. Electrical: Grounded outlet.

Turn off water supply before connecting hoses.
Use only new hoses; do not reuse old ones.
Ensure drain hose is not kinked and is secured properly.
Plug into dedicated outlet; avoid extension cords.

Tip: Check for leaks at connections after first use.

Operating the Washer

Supports various fabrics and soil levels.

Load laundry: Do not overload; leave space for movement.
Add detergent: Use HE detergent; follow manufacturer's instructions.
Select cycle: Turn knob to desired wash cycle.
Adjust settings: Choose temperature, spin speed, and options.
Start wash: Press START/PAUSE; machine will fill, wash, rinse, and spin.
Pause/stop: Press START/PAUSE to pause; turn knob to OFF to cancel.
After cycle: Remove laundry promptly to prevent wrinkles and odors.

WARNING! Do not open door during wash or spin cycles. Wait for lock light to go off.

Special Features

Delay Start: Set wash to begin later (1-24 hours). Child Lock: Prevents changes to settings. Self-Clean Cycle: Run monthly to clean drum and dispenser. Energy Saver: Reduces water temperature and spin speed to save energy.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly. Run Self-Clean cycle every 30 washes.

CAUTION! Do not use abrasive cleaners or solvents. Keep control panel dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/child lock	Ensure plugged in; check circuit breaker; disable child lock.
No water filling	Water supply/hoses	Check water valves are on; inspect hoses for kinks.
Excessive vibration	Leveling/load	Re-level washer; redistribute load evenly.
Water not draining	Drain hose/clog	Check hose for kinks; clean pump filter.
Error code displayed	Sensor issue	Refer to manual for code meaning; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-469-4668; www.kenmore.com