Kenmore Refrigerator Manuals

Most Common Error Codes (All Models)

• Er FF / Er rF: Freezer fan issue – Check for ice blocking fan; unplug for 5 minutes to reset.
• Er IF: Icemaker fan error – Frost buildup; defrost and clear obstructions.
• Er dH: Defrost heater problem – Excessive ice in freezer; manual defrost required.
• Er CF: Condenser fan error – Clean coils and check fan operation.
• Er CO: Communication error – Reset by unplugging for 5 minutes; check wiring.
• SY EF / Er EF: Evaporator fan fault – Common in bottom freezer models.
• OF F / oFF: Display/Demo mode – Hold Energy Saver + Lighting (or similar) for 5 seconds to exit.

Smart & Elite Models

• Wi-Fi not connecting: Ensure 2.4 GHz network; reset Wi-Fi module on control panel.
• Measured Fill not accurate: Run calibration; check water pressure (minimum 35 psi).
• Air filter indicator: Replace filter every 6 months; reset light after replacement.

French Door & Side-by-Side Specific

• Not cooling: Recommended settings: 37°F fridge / 0°F freezer; clean condenser coils yearly.
• Water/ice dispenser slow: Replace water filter; flush line if new filter installed.

Ice Maker Specific

• No ice production: Arm in down position; water line connected; filter not clogged.
• Ice tastes bad: Replace water filter; discard first few batches after replacement.

Safety note: Always unplug before cleaning coils, filters, or internal parts. Do not block air vents or overload shelves.